Skip to Content
KI Maker documentation

Find your KI Maker board documentation

Select your board to open its current owner's manual, specification sheet, mechanical information and Quick Start guide.

Documentation published for all three boards

Read the documentation before applying power. These products are for low-voltage DC applications only. They are not for AC mains or safety-rated functions.

Docs published KI Maker PWR INTF power input and distribution board
PWR INTF

Power input & distribution

Accepts 18–30 VDC and provides regulated 12 V, 5 V and 3.3 V rails, plus fused input-voltage distribution.

  • Owner's manual
  • Specification sheet
  • Mechanical information
  • Quick Start guide
Open PWR INTF documentation View board details
Docs published KI Maker OUT-4 protected low-side MOSFET output board
OUT-4

4-channel protected low-side outputs

Four protected low-side MOSFET outputs for compatible 12 V and 24 V DC loads. Up to 1.0 A on one channel, subject to the 3.0 A shared board limit.

  • Owner's manual
  • Specification sheet
  • Mechanical information
  • Quick Start guide
Open OUT-4 documentation View board details
Docs published KI Maker IN-4 optically isolated 9–30 VDC input board
IN-4

4-channel isolated digital inputs

Four polarity-independent 9–30 VDC field inputs with functional optical isolation and active-high 3.3 V or 5 V logic outputs.

  • Owner's manual
  • Specification sheet
  • Mechanical information
  • Quick Start guide
Open IN-4 documentation View board details

Not sure which board you have, or does the PCB printing differ from the documentation? Send us a photo.